Description
This Comp Cams CL08-602-8 SBC Big Mutha Thumpr Hydraulic Roller Camshaft & Lifter Kit fits the 305-350 Small Block Chevy from 1987-1998 with an O.E. Hydraulic Roller Cam (Carbureted). Comp designed this cam for street/strip use, it has a very rough idle, and it needs a good intake, headers in addition to lower rear end gears. A 9.5:1 or higher compression ratio as well as a 2800+ stall speed torque converter are highly recommended.
Comp Cams CL08-602-8 SBC Big Mutha Thumpr Hydraulic Roller Camshaft & Lifter Kit Specs:
- For 305-350 cubic inch Small Block Chevy engines from 1987-1998
- Includes Camshaft 08-602-8 and Lifter Set 850-16
- Must use bronze tip fuel pump pushrod when using high pressure or high-volume pump
- Stock (O.E.) valve springs can NOT be used.
- Basic RPM Range: 2500 to 6200
- Valve Lift Intake: .533
- Valve Lift Exhaust: .519
- Advertised Intake Duration: 299
- Advertised Exhaust Duration: 319
- Intake Duration at .050”: 243
- Exhaust Duration at .050”: 257
- Lobe Separation: 107
- Firing Order: 1-8-4-3-6-5-7-2
- Made in the USA
Comp Cams designed this Hydraulic Roller camshaft for high performance on the street and dragstrip.
Comp Cams –The Absolute Leader In Valve Train Technology!
Reviews
There are no reviews yet.